Engineering Calculators

Calculators

Select a calculator to get started.

Electrical

Mechanical

Pipe Velocity / Sizing

Check flow velocity through a pipe, or size a pipe for a target velocity.

Pipe Pressure Loss

Compute Darcy-Weisbach head and pressure loss for a pipe run.

Duct Sizing

Size round or rectangular ducts by equal-friction or velocity method.

Expansion Tank Sizing

Thermal expansion tank volume for a domestic water heater or hydronic heating system.

Pressure Tank Sizing

Hydropneumatic pressure tank drawdown volume for conventional or VFD pump control.

Fire Pump Sizing

Demand, capacity resolution, curve validation, and driver power sizing for fire pumps.

Pump TDH

Total Dynamic Head for a pump from static lift, suction/discharge piping, and residual pressure.

Pump Power

Hydraulic and shaft power, plus recommended motor size, from flow and TDH.

Smoke Production (Plume) Calculator

Axisymmetric plume smoke production and volumetric flow rate per NFPA 92.

Natural Smoke and Heat Venting (NFPA 204)

Vent and inlet areas for curtained areas and design fires by NFPA 204 hand calculations, with the dimension and spacing checks.

t-Squared Fire Growth Smoke Production Calculator

Time-varying t-squared fire growth smoke production at a single evaluation time, per NFPA 92.

Natural Smoke Vent Area Calculator

Required natural smoke vent area from smoke volumetric flow rate and temperature, per NFPA 92/204.

Domestic Water Storage

Required domestic water storage volume from occupant count or fixture units, plus storage duration.

Fire Sprinkler Hydraulic Calculation

Remote-area demand, friction loss per segment, and safety margin against the water supply curve.

Standpipe Hydraulic Calculation (NFPA 14)

Flow a standpipe system must deliver for its class, and the pressure needed at the supply, worked back from the most remote hose connection.

Fire Water Storage

Required fire water storage volume from rated pump flow and NFPA 13 hazard classification duration.

Acoustics